OCPBUGS-100044: Updating ose-cluster-openshift-controller-manager-operator-container image to be consistent with ART for 5.0

[openshift-bot]

Updating ose-cluster-openshift-controller-manager-operator-container image to be consistent with ART for 5.0
TLDR:
Product builds by ART can be configured for different base and builder images than corresponding CI
builds. This automated PR requests a change to CI configuration to align with ART's configuration;
please take steps to merge it quickly or contact ART to coordinate changes.

The configuration in the following ART component metadata is driving this alignment request:
ose-cluster-openshift-controller-manager-operator.yml.

Detail:

This repository is out of sync with the downstream product builds for this component. The CI
configuration for at least one image differs from ART's expected product configuration. This should
be addressed to ensure that the component's CI testing accurate reflects what customers will
experience.

Most of these PRs are opened as an ART-driven proposal to migrate base image or builder(s) to a
different version, usually prior to GA. The intent is to effect changes in both configurations
simultaneously without breaking either CI or ART builds, so usually ART builds are configured to
consider CI as canonical and attempt to match CI config until the PR merges to align both. ART may
also configure changes in GA releases with CI remaining canonical for a brief grace period to enable
CI to succeed and the alignment PR to merge. In either case, ART configuration will be made
canonical at some point (typically at branch-cut before GA or release dev-cut after GA), so it is
important to align CI configuration as soon as possible.

PRs are also triggered when CI configuration changes without ART coordination, for instance to
change the number of builder images or to use a different golang version. These changes should be
coordinated with ART; whether ART configuration is canonical or not, preferably it would be updated
first to enable the changes to occur simultaneously in both CI and ART at the same time. This also
gives ART a chance to validate the intended changes first. For instance, ART compiles most
components with the Golang version being used by the control plane for a given OpenShift release.
Exceptions to this convention (i.e. you believe your component must be compiled with a Golang
version independent from the control plane) must be granted by the OpenShift staff engineers and
communicated to the ART team.

Roles & Responsibilities:

• Component owners are responsible for ensuring these alignment PRs merge with passing
  tests OR that necessary metadata changes are reported to the ART team
  in #forum-ocp-art on Slack. If necessary, the changes required by this pull request can be
  introduced with a separate PR opened by the component team. Once the repository is aligned,
  this PR will be closed automatically.
• In particular, it could be that a job like verify-deps is complaining. In that case, please open
  a new PR with the dependency issues addressed (and base images bumped). ART-9595 for reference.
• Patch-manager or those with sufficient privileges within this repository may add
  any required labels to ensure the PR merges once tests are passing. In cases where ART config is
  canonical, downstream builds are already being built with these changes, and merging this PR
  only improves the fidelity of our CI. In cases where ART config is not canonical, this provides
  a grace period for the component team to align their CI with ART's configuration before it becomes
  canonical in product builds.

ART has been configured to reconcile your CI build root image (see https://docs.ci.openshift.org/docs/architecture/ci-operator/#build-root-image).
In order for your upstream .ci-operator.yaml configuration to be honored, you must set the following in your openshift/release ci-operator configuration file:

build_root:
  from_repository: true

Change behavior of future PRs:

• In case you just want to follow the base images that ART suggests, you can configure additional labels to be
  set up automatically. This means that such a PR would merge without human intervention (and awareness!) in the future.
  To do so, open a PR to set the auto_label attribute in the image configuration. Example
• You can set a commit prefix, like UPSTREAM: <carry>: . An example.

If you have any questions about this pull request, please reach out in the #forum-ocp-art Slack channel.

Summary by CodeRabbit

• Chores
  • Updated the build environment to newer OpenShift 5.0 and Go 1.26 tooling.
  • Updated the runtime image used for the controller manager operator.
  • Kept generated binaries, test artifacts, manifests, and runtime configuration unchanged.

[openshift-bot]

Created by ART pipeline job run https://art-jenkins.apps.prod-stable-spoke1-dc-iad2.itup.redhat.com/job/aos-cd-builds/job/build%252Fsync-ci-images/766

[coderabbitai]

Note

Currently processing new changes in this PR. This may take a few minutes, please wait...

⚙️ Run configuration

Configuration used: Repository: openshift/coderabbit/.coderabbit.yaml

Review profile: CHILL

Plan: Enterprise

Run ID: f08163d4-5b20-4906-98a4-873f5daa412d

📥 Commits

Reviewing files that changed from the base of the PR and between 34f95b0 and 4f94df8.

📒 Files selected for processing (2)

• .ci-operator.yaml
• Dockerfile

✨ Finishing Touches

🧪 Generate unit tests (beta)

• Create PR with unit tests

---

_{Comment @coderabbitai help to get the list of available commands.}

[openshift-ci]

[APPROVALNOTIFIER] This PR is NOT APPROVED

This pull-request has been approved by:
Once this PR has been reviewed and has the lgtm label, please assign sayan-biswas for approval. For more information see the Code Review Process.

The full list of commands accepted by this bot can be found here.

Details

Needs approval from an approver in each of these files:

• OWNERS

Approvers can indicate their approval by writing /approve in a comment
Approvers can cancel approval by writing /approve cancel in a comment

[coderabbitai]

Actionable comments posted: 3

🤖 Prompt for all review comments with AI agents

Verify each finding against current code. Fix only still-valid issues, skip the
rest with a brief reason, keep changes minimal, and validate.

Inline comments:
In `@Dockerfile`:
- Line 7: Add a USER declaration in the final Docker image stage using the
project-supported non-root identity, such as non-root, before the image is
released. Ensure the runtime image does not run as root while preserving the
existing base image configuration.
- Line 7: Add a Dockerfile HEALTHCHECK instruction for the runtime image based
on the operator’s existing health endpoint or health probe command, ensuring it
reliably reports container health through image metadata. Keep the current base
image and runtime configuration unchanged.
- Line 3: Replace the broad COPY . . instruction in the Dockerfile with explicit
COPY directives for only the source files, configuration, and other inputs
required by the build. Exclude secrets, credentials, generated artifacts, and
unrelated repository files from the build context.

🪄 Autofix (Beta)

Fix all unresolved CodeRabbit comments on this PR:

• Push a commit to this branch (recommended)
• Create a new PR with the fixes

---

ℹ️ Review info

⚙️ Run configuration

Configuration used: Repository: openshift/coderabbit/.coderabbit.yaml

Review profile: CHILL

Plan: Enterprise

Run ID: f08163d4-5b20-4906-98a4-873f5daa412d

📥 Commits

Reviewing files that changed from the base of the PR and between 34f95b0 and 4f94df8.

📒 Files selected for processing (2)

• .ci-operator.yaml
• Dockerfile

[coderabbitai]

🔒 Security & Privacy | 🟠 Major | 🏗️ Heavy lift

Copy only the files required for the build.

COPY . . sends the entire repository into the builder, including any accidental secrets, credentials, or unrelated artifacts. Replace it with explicit source/configuration copies and keep only required build inputs in the context.

As per path instructions, “COPY specific files, not entire context” and “No secrets in ENV, ARG, or COPY.”

🤖 Prompt for AI Agents

Verify each finding against current code. Fix only still-valid issues, skip the
rest with a brief reason, keep changes minimal, and validate.

In `@Dockerfile` at line 3, Replace the broad COPY . . instruction in the
Dockerfile with explicit COPY directives for only the source files,
configuration, and other inputs required by the build. Exclude secrets,
credentials, generated artifacts, and unrelated repository files from the build
context.

Source: Path instructions

[coderabbitai]

🔒 Security & Privacy | 🟠 Major | ⚡ Quick win

Run the runtime image as a non-root user.

The final stage has no USER declaration, and Trivy reports DS-0002. Add a project-supported non-root UID before release.

As per path instructions, “USER non-root; never run as root.”

🤖 Prompt for AI Agents

Verify each finding against current code. Fix only still-valid issues, skip the
rest with a brief reason, keep changes minimal, and validate.

In `@Dockerfile` at line 7, Add a USER declaration in the final Docker image stage
using the project-supported non-root identity, such as non-root, before the
image is released. Ensure the runtime image does not run as root while
preserving the existing base image configuration.

Sources: Path instructions, Linters/SAST tools

---

🩺 Stability & Availability | 🟠 Major | ⚡ Quick win

Define a container healthcheck.

The runtime stage does not declare HEALTHCHECK, so orchestration cannot reliably detect an unhealthy operator container through the image metadata. Add the appropriate healthcheck for this operator image.

As per path instructions, “HEALTHCHECK defined.”

🤖 Prompt for AI Agents

Verify each finding against current code. Fix only still-valid issues, skip the
rest with a brief reason, keep changes minimal, and validate.

In `@Dockerfile` at line 7, Add a Dockerfile HEALTHCHECK instruction for the
runtime image based on the operator’s existing health endpoint or health probe
command, ensuring it reliably reports container health through image metadata.
Keep the current base image and runtime configuration unchanged.

Source: Path instructions

[openshift-ci-robot]

@openshift-bot: This pull request references Jira Issue OCPBUGS-100044, which is valid. The bug has been moved to the POST state.

3 validation(s) were run on this bug

• bug is open, matching expected state (open)
• bug target version (5.0.0) matches configured target version for branch (5.0.0)
• bug is in the state New, which is one of the valid states (NEW, ASSIGNED, POST)

The bug has been updated to refer to the pull request using the external bug tracker.

Details

In response to this:

Updating ose-cluster-openshift-controller-manager-operator-container image to be consistent with ART for 5.0
TLDR:
Product builds by ART can be configured for different base and builder images than corresponding CI
builds. This automated PR requests a change to CI configuration to align with ART's configuration;
please take steps to merge it quickly or contact ART to coordinate changes.

The configuration in the following ART component metadata is driving this alignment request:
ose-cluster-openshift-controller-manager-operator.yml.

Detail:

This repository is out of sync with the downstream product builds for this component. The CI
configuration for at least one image differs from ART's expected product configuration. This should
be addressed to ensure that the component's CI testing accurate reflects what customers will
experience.

Most of these PRs are opened as an ART-driven proposal to migrate base image or builder(s) to a
different version, usually prior to GA. The intent is to effect changes in both configurations
simultaneously without breaking either CI or ART builds, so usually ART builds are configured to
consider CI as canonical and attempt to match CI config until the PR merges to align both. ART may
also configure changes in GA releases with CI remaining canonical for a brief grace period to enable
CI to succeed and the alignment PR to merge. In either case, ART configuration will be made
canonical at some point (typically at branch-cut before GA or release dev-cut after GA), so it is
important to align CI configuration as soon as possible.

PRs are also triggered when CI configuration changes without ART coordination, for instance to
change the number of builder images or to use a different golang version. These changes should be
coordinated with ART; whether ART configuration is canonical or not, preferably it would be updated
first to enable the changes to occur simultaneously in both CI and ART at the same time. This also
gives ART a chance to validate the intended changes first. For instance, ART compiles most
components with the Golang version being used by the control plane for a given OpenShift release.
Exceptions to this convention (i.e. you believe your component must be compiled with a Golang
version independent from the control plane) must be granted by the OpenShift staff engineers and
communicated to the ART team.

Roles & Responsibilities:

• Component owners are responsible for ensuring these alignment PRs merge with passing
  tests OR that necessary metadata changes are reported to the ART team
  in #forum-ocp-art on Slack. If necessary, the changes required by this pull request can be
  introduced with a separate PR opened by the component team. Once the repository is aligned,
  this PR will be closed automatically.
• In particular, it could be that a job like verify-deps is complaining. In that case, please open
  a new PR with the dependency issues addressed (and base images bumped). ART-9595 for reference.
• Patch-manager or those with sufficient privileges within this repository may add
  any required labels to ensure the PR merges once tests are passing. In cases where ART config is
  canonical, downstream builds are already being built with these changes, and merging this PR
  only improves the fidelity of our CI. In cases where ART config is not canonical, this provides
  a grace period for the component team to align their CI with ART's configuration before it becomes
  canonical in product builds.

ART has been configured to reconcile your CI build root image (see https://docs.ci.openshift.org/docs/architecture/ci-operator/#build-root-image).
In order for your upstream .ci-operator.yaml configuration to be honored, you must set the following in your openshift/release ci-operator configuration file:

build_root:
 from_repository: true

Change behavior of future PRs:

• In case you just want to follow the base images that ART suggests, you can configure additional labels to be
  set up automatically. This means that such a PR would merge without human intervention (and awareness!) in the future.
  To do so, open a PR to set the auto_label attribute in the image configuration. Example
• You can set a commit prefix, like UPSTREAM: <carry>: . An example.

If you have any questions about this pull request, please reach out in the #forum-ocp-art Slack channel.

Summary by CodeRabbit

• Chores
• Updated the build environment to newer OpenShift 5.0 and Go 1.26 tooling.
• Updated the runtime image used for the controller manager operator.
• Kept generated binaries, test artifacts, manifests, and runtime configuration unchanged.

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the openshift-eng/jira-lifecycle-plugin repository.

[openshift-ci]

@openshift-bot: The following test failed, say /retest to rerun all failed tests or /retest-required to rerun all mandatory failed tests:

Test name	Commit	Details	Required	Rerun command
ci/prow/e2e-aws-ovn	4f94df8	link	true	/test e2e-aws-ovn

Full PR test history. Your PR dashboard.

Details

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes-sigs/prow repository. I understand the commands that are listed here.