TradeShowDisplay-Pi

Trade Show Display based on Raspberry Pi and Anthias Digital Signage

Modular 80mm x 80mm square hole pattern allows for customization using single display design

Bill of Materials (BoM)

1. Raspberry Pi 4
2. 7-Inch 1024x600 Screen https://www.amazon.com/gp/product/B09XKC53NH
3. 3D Printed Display (STEP Included)
4. M 2.5 Tapered Heat-Set Inserts

• https://www.mcmaster.com/94180A321/

5. M 2.5 Screws

• https://www.mcmaster.com/92000A103/

Raspberry Pi Installation Instructions

1. Install Raspberry Pi OS Lite onto SD Card using Raspberry Pi Imager
2. Edit config.txt to add the following lines:

• hdmi_force_hotplug=1
• hdmi_group=2
• hdmi_mode=87
• hdmi_cvt=1024 600 60 3 0 0 0
• hdmi_drive=1

3. Start Raspberry Pi and Log In. Run the following command while connected to network: bash <(curl -sL https://install-anthias.srly.io)
4. Reboot, log in via IP Address, and add content