chore(deps): bump github.com/redis/go-redis/v9 from 9.17.2 to 9.21.0 in /services/features-service

[dependabot]

Bumps github.com/redis/go-redis/v9 from 9.17.2 to 9.21.0.

Release notes

Sourced from github.com/redis/go-redis/v9's releases.

9.21.0

This is a minor release adding new features and bug fixes. There are no breaking changes; upgrading from 9.20.x is a drop-in replacement.

🚀 Highlights

Zero-copy GetToBuffer / SetFromBuffer

Two new StringCmdable methods let callers read and write Redis string values directly into and from pre-allocated byte buffers, eliminating the per-call payload allocation that Get/Set incur:

GetToBuffer(ctx, key, buf) *ZeroCopyStringCmd   // reads into buf; ZeroCopyStringCmd { Val() int; Bytes() []byte; Result() (int, error) }
SetFromBuffer(ctx, key, buf) *StatusCmd

GetToBuffer decodes the bulk reply straight into the caller-owned buf (no intermediate allocation); a buffer that is too small returns an error after draining the payload, so the connection stays aligned for the next reply. SetFromBuffer is provided for API symmetry — it dispatches to the same []byte writer path as Set(ctx, key, buf, 0) and produces byte-identical output on the wire. Available on *Client, *ClusterClient, *Ring, *Conn and Pipeliner.

(#3834) by @​ndyakov

Explicit LIMIT 0 for stream trimming

Redis treats XTRIM/XADD approximate-trim (~) LIMIT 0 as "disable the trimming effort cap entirely", which differs from omitting LIMIT (the implicit 100 * stream-node-max-entries default). The command builders previously only emitted LIMIT when limit > 0, so callers could never send an explicit LIMIT 0. Following the KeepTTL = -1 precedent, the new XTrimLimitDisabled = -1 sentinel now emits an explicit LIMIT 0; limit == 0 keeps the historical no-LIMIT behavior, so existing callers produce byte-identical commands.

(#3848) by @​TheRealMal

✨ New Features

• Zero-copy buffer string commands: new GetToBuffer / SetFromBuffer on StringCmdable and the ZeroCopyStringCmd result type, reading/writing string values into caller-owned buffers without per-call payload allocation (#3834) by @​ndyakov
• XTrimLimitDisabled sentinel: XTRIM/XADD approximate trimming can now send an explicit LIMIT 0 to disable the trim effort cap, via the new XTrimLimitDisabled = -1 sentinel (#3848) by @​TheRealMal
• PubSub health-check timeouts: channel.initHealthCheck now bounds the Ping it issues with a fresh per-check timeout context (the exported pingTimeout / reconnectTimeout) instead of context.TODO(), so a stuck health-check Ping can no longer block indefinitely (#3819) by @​abdellani
• Skip redundant UNWATCH in Tx.Close: a transaction now tracks whether a WATCH is still active (watchArmed) and only issues UNWATCH on Close when it is, removing an extra round trip on the common WATCH/.../EXEC and no-key Watch paths while never returning a connection to the pool with an active watch (#3854) by @​fcostaoliveira

🐛 Bug Fixes

• maintnotifications ModeAuto fail-open: ModeAuto now stays fail-open when the server does not support maintenance notifications — connections are retired and tracking is guarded during downgrade so the client keeps working instead of erroring (#3853) by @​terrorobe

👥 Contributors

We'd like to thank all the contributors who worked on this release!

@​abdellani, @​fcostaoliveira, @​ndyakov, @​terrorobe, @​TheRealMal

9.20.1

This is a patch release containing bug fixes only. There are no new features or breaking changes; upgrading from 9.20.0 is a drop-in replacement.

🚀 Highlights

RESP3 pub/sub message loss fixed

PeekPushNotificationName previously inspected only the bytes already buffered by bufio, so when a push frame header straddled a buffer fill boundary it could return a truncated notification name (e.g. "messa" instead of "message"). The push processor then mis-routed the frame and ReadReply silently dropped it, causing intermittent RESP3 pub/sub message loss. The peek now grows its window (36 bytes → up to 4 KiB) and reads more from the connection until the header is complete, cleanly separating incomplete prefixes from corrupt frames (including overflow-safe bulk-length handling). Fixes #3839.

... (truncated)

Changelog

Sourced from github.com/redis/go-redis/v9's changelog.

9.21.0 (2026-06-18)

This is a minor release adding new features and bug fixes. There are no breaking changes; upgrading from 9.20.x is a drop-in replacement.

🚀 Highlights

Zero-copy GetToBuffer / SetFromBuffer

Two new StringCmdable methods let callers read and write Redis string values directly into and from pre-allocated byte buffers, eliminating the per-call payload allocation that Get/Set incur:

GetToBuffer(ctx, key, buf) *ZeroCopyStringCmd   // reads into buf; ZeroCopyStringCmd { Val() int; Bytes() []byte; Result() (int, error) }
SetFromBuffer(ctx, key, buf) *StatusCmd

GetToBuffer decodes the bulk reply straight into the caller-owned buf (no intermediate allocation); a buffer that is too small returns an error after draining the payload, so the connection stays aligned for the next reply. SetFromBuffer is provided for API symmetry — it dispatches to the same []byte writer path as Set(ctx, key, buf, 0) and produces byte-identical output on the wire. Available on *Client, *ClusterClient, *Ring, *Conn and Pipeliner.

(#3834) by @​ndyakov

Explicit LIMIT 0 for stream trimming

Redis treats XTRIM/XADD approximate-trim (~) LIMIT 0 as "disable the trimming effort cap entirely", which differs from omitting LIMIT (the implicit 100 * stream-node-max-entries default). The command builders previously only emitted LIMIT when limit > 0, so callers could never send an explicit LIMIT 0. Following the KeepTTL = -1 precedent, the new XTrimLimitDisabled = -1 sentinel now emits an explicit LIMIT 0; limit == 0 keeps the historical no-LIMIT behavior, so existing callers produce byte-identical commands.

(#3848) by @​TheRealMal

✨ New Features

• Zero-copy buffer string commands: new GetToBuffer / SetFromBuffer on StringCmdable and the ZeroCopyStringCmd result type, reading/writing string values into caller-owned buffers without per-call payload allocation (#3834) by @​ndyakov
• XTrimLimitDisabled sentinel: XTRIM/XADD approximate trimming can now send an explicit LIMIT 0 to disable the trim effort cap, via the new XTrimLimitDisabled = -1 sentinel (#3848) by @​TheRealMal
• PubSub health-check timeouts: channel.initHealthCheck now bounds the Ping it issues with a fresh per-check timeout context (the exported pingTimeout / reconnectTimeout) instead of context.TODO(), so a stuck health-check Ping can no longer block indefinitely (#3819) by @​abdellani
• Skip redundant UNWATCH in Tx.Close: a transaction now tracks whether a WATCH is still active (watchArmed) and only issues UNWATCH on Close when it is, removing an extra round trip on the common WATCH/.../EXEC and no-key Watch paths while never returning a connection to the pool with an active watch (#3854) by @​fcostaoliveira

🐛 Bug Fixes

• maintnotifications ModeAuto fail-open: ModeAuto now stays fail-open when the server does not support maintenance notifications — connections are retired and tracking is guarded during downgrade so the client keeps working instead of erroring (#3853) by @​terrorobe

👥 Contributors

We'd like to thank all the contributors who worked on this release!

@​abdellani, @​fcostaoliveira, @​ndyakov, @​terrorobe, @​TheRealMal

---

Full Changelog: redis/go-redis@v9.20.1...v9.21.0

9.20.1 (2026-06-11)

This is a patch release containing bug fixes only. There are no new features or breaking changes; upgrading from 9.20.0 is a drop-in replacement.

... (truncated)

Commits

• 1551837 chore(release): 9.21.0 (#3857)
• 1cfa927 fix(maintnotifications): keep ModeAuto fail-open (#3853)
• 1f0ea0e feat(pubsub): introduce timeouts for Ping on channel.initHealthCheck (#3819)
• 5484b0b feat(tx): skip redundant UNWATCH in Tx.Close when no WATCH is active (#3854)
• bf57a51 chore(deps): bump rojopolis/spellcheck-github-actions (#3852)
• 641294c feat(streams): support explicit LIMIT 0 in XTRIM/XADD trimming via XTrimLimit...
• 74d9bb0 feat(command): add zero-copy GetToBuffer and SetFromBuffer (#3834)
• a13416b chore(release): 9.20.1 (#3847)
• 10dc44f fix(push): fix peeking when push name is truncated (#3842)
• e1a2d68 fix(ft.hybrid): Always generate vector param names if they are not provided b...
• Additional commits viewable in compare view

[dependabot]

OK, I won't notify you again about this release, but will get in touch when a new version is available. If you'd rather skip all updates until the next major or minor version, let me know by commenting @dependabot ignore this major version or @dependabot ignore this minor version. You can also ignore all major, minor, or patch releases for a dependency by adding an ignore condition with the desired update_types to your config file.

If you change your mind, just re-open this PR and I'll resolve any conflicts on it.