VSCode-Updater

A deterministic, operator‑grade PowerShell module for safely updating Visual Studio Code on Windows.
Provides full logging, cleanup routines, installer caching, and a multi‑lane watchdog to detect and recover from installer stalls.

---

Why This Exists

The built‑in Visual Studio Code updater frequently fails on long‑lived Windows systems due to:

• stale bootstrapper processes
• orphaned InnoSetup workers
• partial or corrupted installs
• silent failures with no diagnostics
• reissued builds that reuse the same version number
• inconsistent behavior across Windows update states

These issues cause VS Code to hang, refuse to launch, or leave behind incomplete installations.

VSCode-Updater replaces the non‑deterministic built‑in updater with a reproducible, watchdog‑driven update pipeline designed for operators, automation, and audit transparency.

---

Features

• Fully automated VS Code update workflow
• Deterministic logging with timestamped, single‑line entries
• Cleanup routines for bootstrapper, helpers, and Inno workers
• Installer acquisition and caching
• Detached installer execution
• Multi‑lane watchdog monitoring:
  • Filesystem stall detection
  • CPU/Disk idle stall detection
  • CPU/Disk active stall detection
• Automatic stall recovery and retry logic
• Explicit, automation‑safe return codes
• Pester test suite for critical components
• Primary public API (Update-VSCode) supported by additional operator‑grade commands for version management, rollback, diagnostics, and safe‑mode execution.

---

Requirements

• PowerShell 7.6 or later
• Windows 10 or Windows 11

---

Installation

You can use the module in two ways:

1. Install into a PowerShell module path (auto‑load)

Place the module under a standard module directory, for example:

$HOME\Documents\PowerShell\Modules\VSCode-Updater\

PowerShell will auto‑load it when you call:

No explicit Import-Module is required in this case.

2. Use from a custom location (explicit import required)

If the module lives in a custom path (for example, under a project tree or sync folder), you must import it before calling Update-VSCode:

Import-Module "C:\Path\To\VSCode-Updater\VSCode-Updater.psd1" -Force

Update-VSCode

The function cannot be executed until the module is imported (either auto‑loaded from a module path or imported explicitly).

Usage

Basic Invocation

Update-VSCode

This triggers the full deterministic update pipeline:

• Cleanup of stale installer processes
• Optional skip/force download modes
• Installer download and caching
• Detached installer launch
• Watchdog monitoring of progress
• Stall detection and recovery
• Final cleanup and exit code emission

No parameters are required for a standard update run.

However, parameters are available for advanced control (see below).

Parameters

Update-VSCode exposes optional parameters for operator and automation scenarios. (Adjust this list to match your actual parameter set.)

Update-VSCode [
    -SkipUpdate
    -SkipDownload
    -ForceDownload
    -RetryCount <int>
    -IdleTimeout <int>
]

Parameter Details

• -SkipUpdate Bypasses the update process entirely. Useful when you want to run cleanup routines or validate environment behavior without performing an update.

• -SkipDownload Uses an already‑cached installer. No network request is made. If no cached installer exists, return code 12 is emitted.

• -ForceDownload Always downloads a fresh installer, ignoring any cached copy. Overrides -SkipDownload if both are provided.

• -RetryCount <int> (default: 3) Number of retry attempts the watchdog will perform if a stall is detected.

• -IdleTimeout <int> (default: 600 seconds) Maximum allowed stall duration before the watchdog triggers a retry or failure. Applies to filesystem, idle, and active stall detection lanes.

All parameters are optional. If you call Update-VSCode with no arguments, the module runs with its default, deterministic behavior.

Additional Commands

VSCode‑Updater now includes a suite of operator‑grade commands for version management, rollback, diagnostics, and safe‑mode execution. All commands are exported automatically when the module is imported.

Get-VSCodeVersions

Lists all installed VS Code versions detected on the system, including:

• Stable builds
• User installers
• System installers
• Portable ZIP installs (if present)

Useful for multi‑version environments or verifying rollback targets.

Switch-VSCodeVersion

Switches the active VS Code version by updating the symlink that VSCode‑Updater manages.

This enables:

• Fast version switching
• Testing new builds without uninstalling
• Reverting to older builds for compatibility testing

Invoke-VSCodeRollback

Rolls back to the previously installed version of VS Code.

Rollback is:

• Instant (symlink swap)
• Deterministic
• Logged
• Fully reversible

Test-VSCodeSymlink

Validates the integrity of the VS Code symlink used by the updater.

Checks include:

• Target existence
• Target validity
• Permission correctness
• Path consistency

Useful for diagnosing broken installs or manual tampering.

Start-VSCodeSafeMode

Launches VS Code with:

• All extensions disabled
• No cached state
• No workspace restore

This is ideal for diagnosing:

• startup crashes
• extension conflicts
• corrupted state

Get-VSCodeDashboard

Displays a structured diagnostic dashboard including:

• Installed versions
• Active version
• Symlink status
• Installer cache status
• Last update result
• Watchdog metrics

Designed for operators and monitoring systems.

Invoke-ZipFallback

Extracts and installs VS Code from a ZIP archive when the standard installer fails.

This fallback path is:

• deterministic
• logged
• watchdog‑compatible
• used automatically when needed

Verify Module Load

Get-Command -Module VSCode-Updater

Expected:

Function Update-VSCode

Example Output

A typical successful run:

[2025-03-27 09:14:22] INFO  Detected installed version: 1.89.1
[2025-03-27 09:14:23] INFO  Latest version available: 1.90.0
[2025-03-27 09:14:24] INFO  Downloaded installer to: C:\Temp\vscode.exe
[2025-03-27 09:14:31] INFO  Update completed successfully

All output is automation‑safe and audit‑transparent.

Architecture Overview

VSCode-Updater uses a four‑lane deterministic pipeline:

1. Discovery Lane

   • Detect installed version
   • Query latest available version
   • Validate cached installer

2. Acquisition Lane

   • Download installer if required
   • Cache installer for reuse
   • Validate file integrity

3. Execution Lane

   • Launch installer in detached mode
   • Track installer PID
   • Monitor filesystem and resource activity

4. Watchdog Lane

   • Filesystem stall detection
   • CPU/Disk idle stall detection
   • CPU/Disk active stall detection
   • Automatic retries
   • Deterministic exit codes

Watchdog Behavior

The watchdog monitors the installer for progress and detects stalls using three independent signals.

Stall Conditions

Stall Type	Description
Filesystem Stall	No writes to the VS Code install directory for the full IdleTimeout
Idle Stall	CPU=0 and Disk=0 for the full IdleTimeout
Active Stall	CPU/Disk metrics frozen (no change) for the full IdleTimeout

Each stall type produces a distinct return code and log entry.

Return Codes

Code	Meaning
0	Success
10	Download failure
12	Cached installer missing
13	Installer start failure
14	Installer stalled after all retries
20	SkipUpdate flag used
30	Filesystem stall detected
31	CPU/Disk idle stall detected
32	CPU/Disk active stall detected
99	Unexpected watchdog state

These codes are deterministic and safe for automation, monitoring, and CI/CD pipelines.

Logging Behavior

• Single‑line, timestamped entries
• No banners or multi‑line blocks
• All watchdog transitions logged
• All exit paths emit a final banner with exit code
• Fully audit‑transparent

Compatibility

Component	Supported
Windows 10	✔
Windows 11	✔
VS Code Stable	✔
VS Code Insiders	⚠ Not supported (Stable installer will overwrite Insiders)
PowerShell 7.6+	✔
ARM64	⚠ Untested (expected to work with ARM64 user installer)

Development Status

This module is stable and feature‑complete. Tests and documentation continue to expand as it moves toward broader deployment.

Running Tests

Invoke-Pester -Path Tests

License

This project is licensed under the MIT License. See the LICENSE file for details.

Related Projects

These tools are part of the Linktech Engineering operator‑grade ecosystem:

• RunUpdates — Cross‑platform, schema‑driven update orchestrator with deterministic execution, frozen binaries, and operator‑grade logging. Supports Linux, Windows, and macOS with unified stdout‑based update detection.
• NMS_Tools — Network Monitoring Suite tools for certificate checks, HTML checks, interface checks, and more.
• rust-logger — Structured, deterministic logging library for Rust applications.
• licensegen — Deterministic license generator with reproducible output and SPDX‑compliant metadata.
• BotScanner-Community — Community edition of the BotScanner host and flow inspection framework.