diff --git a/custom_components/opendisplay/__init__.py b/custom_components/opendisplay/__init__.py
index 2297b75..137f934 100644
--- a/custom_components/opendisplay/__init__.py
+++ b/custom_components/opendisplay/__init__.py
@@ -281,7 +281,7 @@ async def async_setup_entry(hass: HomeAssistant, entry: OpenDisplayConfigEntry)
     from .update import _format_firmware_version
 
     profile = SleepProfile.from_entry(entry, device_config)
-    coordinator = OpenDisplayCoordinator(hass, address)
+    coordinator = OpenDisplayCoordinator(hass, address, device_config.binary_inputs)
 
     manufacturer = device_config.manufacturer
     display = device_config.displays[0]
diff --git a/custom_components/opendisplay/coordinator.py b/custom_components/opendisplay/coordinator.py
index 2858ff4..520c762 100644
--- a/custom_components/opendisplay/coordinator.py
+++ b/custom_components/opendisplay/coordinator.py
@@ -11,6 +11,7 @@
     TouchChangeEvent,
     TouchTracker,
 )
+from opendisplay.models.config import BinaryInputs
 
 from homeassistant.components.bluetooth import (
     BluetoothChange,
@@ -40,8 +41,20 @@ class OpenDisplayUpdate:
 class OpenDisplayCoordinator(PassiveBluetoothDataUpdateCoordinator):
     """Coordinator for passive BLE advertisement updates from an OpenDisplay device."""
 
-    def __init__(self, hass: HomeAssistant, address: str) -> None:
-        """Initialize the coordinator."""
+    def __init__(
+        self,
+        hass: HomeAssistant,
+        address: str,
+        binary_inputs: list[BinaryInputs] | None = None,
+    ) -> None:
+        """Initialize the coordinator.
+
+        binary_inputs comes from the device config and tells the tracker which
+        bytes of the advertisement's dynamic block are really buttons. The rest
+        belong to touch controllers and sensors and decode into valid-looking
+        button reports, so without it a moving touch coordinate or a refreshed
+        SHT40 reading produces phantom button transitions.
+        """
         super().__init__(
             hass,
             _LOGGER,
@@ -50,7 +63,15 @@ def __init__(self, hass: HomeAssistant, address: str) -> None:
             connectable=True,
         )
         self.data: OpenDisplayUpdate | None = None
-        self._tracker: AdvertisementTracker = AdvertisementTracker()
+        self._tracker: AdvertisementTracker = AdvertisementTracker(
+            None
+            if binary_inputs is None
+            else [
+                index
+                for bi in binary_inputs
+                if (index := bi.published_button_byte_index) is not None
+            ]
+        )
         self.touch_trackers: list[TouchTracker] = []
         # Subscribers notified once when the advertised reboot flag goes
         # False -> True (the device rebooted since we last talked to it).
diff --git a/custom_components/opendisplay/manifest.json b/custom_components/opendisplay/manifest.json
index 73d5883..39a61db 100644
--- a/custom_components/opendisplay/manifest.json
+++ b/custom_components/opendisplay/manifest.json
@@ -15,6 +15,6 @@
   "iot_class": "local_push",
   "issue_tracker": "https://github.com/OpenDisplay/Home_Assistant_Integration/issues",
   "loggers": ["opendisplay"],
-  "requirements": ["py-opendisplay[silabs-ota]==7.14.1", "odl-renderer==0.5.12"],
+  "requirements": ["py-opendisplay[silabs-ota]==7.15.0", "odl-renderer==0.5.12"],
   "version": "3.0.0-beta.9"
 }
diff --git a/custom_components/opendisplay/sensor.py b/custom_components/opendisplay/sensor.py
index 8107ed0..29ff665 100644
--- a/custom_components/opendisplay/sensor.py
+++ b/custom_components/opendisplay/sensor.py
@@ -6,7 +6,9 @@
 import time
 
 from opendisplay import voltage_to_percent
-from opendisplay.models.enums import CapacityEstimator, PowerMode
+from opendisplay.models.advertisement import Sht40Reading
+from opendisplay.models.config import SensorData
+from opendisplay.models.enums import CapacityEstimator, PowerMode, SensorType
 
 from homeassistant.components.bluetooth import async_last_service_info
 from homeassistant.components.sensor import (
@@ -39,8 +41,12 @@ class OpenDisplaySensorEntityDescription(SensorEntityDescription):
     value_fn: Callable[[OpenDisplayUpdate], float | int | str | datetime | None]
 
 
+# The MCU's own temperature, not an attached sensor. translation_key only sets
+# the display name; the key -- and so the unique_id -- stays "temperature", so
+# entities that already exist keep their history.
 _TEMPERATURE_DESCRIPTION = OpenDisplaySensorEntityDescription(
     key="temperature",
+    translation_key="chip_temperature",
     device_class=SensorDeviceClass.TEMPERATURE,
     native_unit_of_measurement=UnitOfTemperature.CELSIUS,
     state_class=SensorStateClass.MEASUREMENT,
@@ -49,6 +55,52 @@ class OpenDisplaySensorEntityDescription(SensorEntityDescription):
     value_fn=lambda upd: upd.advertisement.temperature_c,
 )
 
+
+def _sht40_descriptions(
+    sensor: SensorData,
+) -> list[OpenDisplaySensorEntityDescription]:
+    """Build ambient temperature and humidity entities for one SHT40.
+
+    The reading rides in the advertisement, so these need no connection. Its
+    offset within the dynamic block is per-board and cannot be assumed --
+    reTerminal E1001/E1002/E1004 use 1 while the firmware default is 7 -- so it
+    comes from the device's own config and is captured once per entity here.
+
+    Unlike the chip temperature these are primary entities: not diagnostic, and
+    enabled by default.
+    """
+    start_byte = sensor.sht40_msd_start_byte
+
+    def _reading(upd: OpenDisplayUpdate) -> Sht40Reading | None:
+        return upd.advertisement.sht40_reading(start_byte)
+
+    def _temperature(upd: OpenDisplayUpdate) -> float | None:
+        reading = _reading(upd)
+        return None if reading is None else reading.temperature_c
+
+    def _humidity(upd: OpenDisplayUpdate) -> float | None:
+        reading = _reading(upd)
+        return None if reading is None else reading.humidity_percent
+
+    return [
+        OpenDisplaySensorEntityDescription(
+            key=f"sht40_{sensor.instance_number}_temperature",
+            device_class=SensorDeviceClass.TEMPERATURE,
+            native_unit_of_measurement=UnitOfTemperature.CELSIUS,
+            state_class=SensorStateClass.MEASUREMENT,
+            suggested_display_precision=1,
+            value_fn=_temperature,
+        ),
+        OpenDisplaySensorEntityDescription(
+            key=f"sht40_{sensor.instance_number}_humidity",
+            device_class=SensorDeviceClass.HUMIDITY,
+            native_unit_of_measurement=PERCENTAGE,
+            state_class=SensorStateClass.MEASUREMENT,
+            suggested_display_precision=1,
+            value_fn=_humidity,
+        ),
+    ]
+
 _BATTERY_POWER_MODES = {PowerMode.BATTERY, PowerMode.SOLAR}
 
 _BATTERY_VOLTAGE_DESCRIPTION = OpenDisplaySensorEntityDescription(
@@ -92,13 +144,18 @@ async def async_setup_entry(
 ) -> None:
     """Set up OpenDisplay sensor entities."""
     coordinator = entry.runtime_data.coordinator
-    power_config = entry.runtime_data.device_config.power
+    device_config = entry.runtime_data.device_config
+    power_config = device_config.power
     descriptions: list[OpenDisplaySensorEntityDescription] = [
         _TEMPERATURE_DESCRIPTION,
         _RSSI_DESCRIPTION,
         _LAST_SEEN_DESCRIPTION,
     ]
 
+    for sensor in device_config.sensors:
+        if sensor.sensor_type_enum is SensorType.SHT40:
+            descriptions += _sht40_descriptions(sensor)
+
     if power_config.power_mode_enum in _BATTERY_POWER_MODES:
         capacity_estimator = power_config.capacity_estimator or CapacityEstimator.LI_ION
         descriptions += [
diff --git a/custom_components/opendisplay/strings.json b/custom_components/opendisplay/strings.json
index 3efbbe8..b6c7998 100644
--- a/custom_components/opendisplay/strings.json
+++ b/custom_components/opendisplay/strings.json
@@ -109,6 +109,9 @@
       }
     },
     "sensor": {
+      "chip_temperature": {
+        "name": "Chip temperature"
+      },
       "battery_voltage": {
         "name": "Battery voltage"
       },
diff --git a/custom_components/opendisplay/translations/en.json b/custom_components/opendisplay/translations/en.json
index eae8fe1..62e8454 100644
--- a/custom_components/opendisplay/translations/en.json
+++ b/custom_components/opendisplay/translations/en.json
@@ -109,6 +109,9 @@
             }
         },
         "sensor": {
+            "chip_temperature": {
+                "name": "Chip temperature"
+            },
             "battery_voltage": {
                 "name": "Battery voltage"
             },
diff --git a/tests/test_sht40_sensors.py b/tests/test_sht40_sensors.py
new file mode 100644
index 0000000..8c69ca6
--- /dev/null
+++ b/tests/test_sht40_sensors.py
@@ -0,0 +1,118 @@
+"""Unit tests for the SHT40 ambient temperature/humidity sensors.
+
+These avoid the full Home Assistant test harness: the entity descriptions are
+built directly from a SensorData packet and their ``value_fn`` is applied to a
+hand-built coordinator update, which is the whole of the decode path.
+"""
+
+from unittest.mock import MagicMock
+
+from opendisplay.models.advertisement import parse_advertisement
+from opendisplay.models.config import SensorData
+from opendisplay.models.enums import SensorType
+
+from custom_components.opendisplay.coordinator import OpenDisplayUpdate
+from custom_components.opendisplay.sensor import (
+    _TEMPERATURE_DESCRIPTION,
+    _sht40_descriptions,
+)
+
+ADDRESS = "AA:BB:CC:DD:EE:FF"
+READING = bytes.fromhex("7ca20a")  # 28.0 C / 63.6 %RH
+
+
+def _sensor(msd_data_start_byte: int = 7) -> SensorData:
+    return SensorData(
+        instance_number=0,
+        sensor_type=SensorType.SHT40,
+        bus_id=0,
+        i2c_addr_7bit=0x44,
+        msd_data_start_byte=msd_data_start_byte,
+    )
+
+
+def _update(block: bytes = READING, start_byte: int = 7) -> OpenDisplayUpdate:
+    """A coordinator update whose advertisement carries an SHT40 reading."""
+    dynamic = bytearray(11)
+    dynamic[start_byte : start_byte + 3] = block
+    advertisement = parse_advertisement(bytes(dynamic) + bytes([124, 139, 0]))
+    return OpenDisplayUpdate(address=ADDRESS, advertisement=advertisement)
+
+
+def _values(sensor: SensorData, update: OpenDisplayUpdate) -> dict[str, float | None]:
+    return {d.key: d.value_fn(update) for d in _sht40_descriptions(sensor)}
+
+
+def test_reads_temperature_and_humidity():
+    values = _values(_sensor(), _update())
+
+    assert values["sht40_0_temperature"] == 28.0
+    assert values["sht40_0_humidity"] == 63.6
+
+
+def test_reads_from_the_configured_offset():
+    """E1001/E1002/E1004 place the block at 1, not the firmware default of 7."""
+    values = _values(_sensor(msd_data_start_byte=1), _update(start_byte=1))
+
+    assert values["sht40_0_temperature"] == 28.0
+
+
+def test_offset_zero_resolves_to_the_default_slot():
+    """0 means "use the default", not byte 0 -- so the reading is still found."""
+    values = _values(_sensor(msd_data_start_byte=0), _update(start_byte=7))
+
+    assert values["sht40_0_temperature"] == 28.0
+
+
+def test_failed_read_reports_unknown():
+    """FF FF FF is the firmware's read-failure sentinel, not a measurement."""
+    values = _values(_sensor(), _update(block=b"\xff\xff\xff"))
+
+    assert values["sht40_0_temperature"] is None
+    assert values["sht40_0_humidity"] is None
+
+
+def test_unwritten_slot_reports_unknown():
+    """An all-zero slot decodes to -40 C / 0 %RH but means "never written"."""
+    values = _values(_sensor(), _update(block=b"\x00\x00\x00"))
+
+    assert values["sht40_0_temperature"] is None
+    assert values["sht40_0_humidity"] is None
+
+
+def test_entities_are_primary_not_diagnostic():
+    """Ambient readings are what the device is for; the chip temperature is not."""
+    for description in _sht40_descriptions(_sensor()):
+        assert description.entity_category is None
+        assert description.entity_registry_enabled_default is True
+
+
+def test_chip_temperature_stays_diagnostic_and_disabled():
+    assert _TEMPERATURE_DESCRIPTION.entity_category is not None
+    assert _TEMPERATURE_DESCRIPTION.entity_registry_enabled_default is False
+
+
+def test_chip_temperature_keeps_its_unique_id_key():
+    """Renaming is display-only: changing the key would orphan existing entities."""
+    assert _TEMPERATURE_DESCRIPTION.key == "temperature"
+    assert _TEMPERATURE_DESCRIPTION.translation_key == "chip_temperature"
+
+
+def test_keys_are_distinct_per_instance():
+    """A second SHT40 must not collide with the first one's unique_id."""
+    first = {d.key for d in _sht40_descriptions(_sensor())}
+    second_sensor = _sensor()
+    second_sensor.instance_number = 1
+
+    assert first.isdisjoint({d.key for d in _sht40_descriptions(second_sensor)})
+
+
+def test_value_is_none_before_any_advertisement():
+    """native_value guards on coordinator.data being None."""
+    from custom_components.opendisplay.sensor import OpenDisplaySensorEntity
+
+    coordinator = MagicMock()
+    coordinator.data = None
+    entity = OpenDisplaySensorEntity(coordinator, _sht40_descriptions(_sensor())[0])
+
+    assert entity.native_value is None